Split Seals

 

Model No.
Split Seals

Features

Shaft Diameter

in. (mm)

Surface Speed
Spring Type
Pressure
Model 21
Model-21.png
• General purpose split seal
• Low-speed service
• Cover plate required
3.000 to 42.000
(76.2 to 1066.8)
1,000 ft/min
(5.1 m/s)
Molded-in
stainless steel finger
N/A
Model 23
Model-23.png
• General service split seal
• Cover plate required
• Over 300,000 sizes readily available
3.000 (76.2)
and up
2,000 ft/min
(10.2 m/s)
Molded-in
stainless steel finger
N/A
Model 24
Model-24.png
• Special purpose split seal for tapered housing grooves
• Low-speed service
• Tapered O.D.
• Cover plate required
3.000 to 21.500
(76.2 to 546.1)
1,000 ft/min
(5.1 m/s)
Molded-in
stainless steel finger
N/A
Model 25
Model-25.png
• PTFE split seal
• Low-speed service
• Excellent chemical resistance
• Cover plate required
3.000 to 20.000
(76.2 to 508.0)
1,000 ft/min
(5.1 m/s)
Carbon steel garter
N/A
Model 26
Model-26.png
• High-performance seal
• Solid or split design
• Reverse bevel lip design prevents lip rollover
• Reinforced rubber O.D.
• Single and dual lip configurations available
• Cover plate recommended for bore diameters over 10"
0.750 to 60.000
(19.0 to 1524.0)
5,000 ft/min
(25.4 m/s)
Molded-in
stainless steel finger
To 7 psi
(0.4 bar)
(N/A if split