Large Seals

Model No.
Large Seals

Features

Shaft Diameter

in. (mm)

Surface Speed
Spring Type
Pressure
Model 26
Model-26.png
• High-performance seal
• Solid or split design
• Reverse bevel lip design prevents lip rollover
• Reinforced rubber O.D.
• Single and dual lip configurations available
0.750 to 60.000
(19.0 to 1524.0)

5,000 ft/min
(25.4 m/s)

Molded-in
stainless steel finger
To 7 psi
(0.4 bar)
(N/A if split)
Model 59
Model-59.png 
• Severe service assembled seal
• Heavy duty outer case
• Reverse bevel lip design prevents lip rollover
• Aggressive shaft-to-bore misalignment capability
6.000 to 70.000
(152.4 to 1778.0)
5,000 ft/min
(25.4 m/s)
Molded-in
stainless steel finger
To 7 psi
(0.4 bar)
Model 64
 Model-64.png
• Severe service assembled seal
• Heavy duty metal outer case
• Unique carrier/garter spring combination
• Industry's highest shaft-tobore misalignement capability
8.000 to 74.409
(203.2 to 1890.0)
7,000 ft/min
(35.6 m/s)
Combination
of stainless steel garter & stainless steel finger
To 7 psi
(0.4 bar)
Model 87
 Model-87.png
• Severe service seal
• Metal reinforced rubber O.D.
• Reverse bevel lip design prevents lip rollover
• Aggressive shaft-to-bore misalignment capability
6.000 to 48.000
(152.4 to 1219.2)
5,000 ft/min
(25.4 m/s)
Molded-in
carbon steel garter
To 7 psi
(0.4 bar)